Air Water-Ring Vacuum Pump Automotive Air Pump
|FOB Price:||Get Latest Price|
|Min. Order:||1 Piece|
|Production Capacity:||500 Set/Sets Per Month|
|Transport Package:||Standard Export Plywood Case|
|Payment Terms:||L/C, T/T, Western Union|
- Model NO.: SK
- Brand Name: Yonjou
- Theory: Centrifugal Pump
- Power: Electric
- Application: Various High Temperature Liquid Without Solid
- Pressure: Low Pressure
- Specification: standard
- HS Code: 841311000
- Place of Origin: Zhejiang, China (Mainland)
- Model Number: Sk
- Usage: Air
- Fuel: Electrical Drive
- Color: White/Gray/Gold/Red/Yellow/Blue/Green
- Trademark: YONJOU
- Origin: China
Application: Air, Gas
Capacity range: 1.35~108m3/min
Limited vacuum range: -98~5PA
Caliber range: 10~300mm
Max medium temperature: 70° C
Material: Cast iron, Aluminium alloy, Stainless steel
2BE3 series Liquid ring vacuum pump are the products with high efficiency and energy saving, which are manufactured by our company combining with the advanced technology of the imported products. They are not only can save energy, but also suitable for long-term use and operation. Running in the rough vacuum condition, Liquid ring pump working conditions are often extremely harsh. 2BE3 series products are designed for suction various gases. They can be widely used in coal mine, electric factory, petrifaction and chemical industry, food processing and so on. 2BE3 can be used with various actuating devices, such as belt, gear box, synchrony motor, variable speed drives etc. In addition, in order to save space, more than two or at most four sets of the 2BE3 series pumps can be driven by one motor simultaneously. When set a middle wall in the casing, the left and right parts of 2BE3 can run under different vacuum respectively, if the pressure tolerance between the two sides is lower than 80kP, one pump can completely work like two. This feature further enhances the operational flexibility of 2BE3 vacuum pump
1. The gap, corrosion status, fouling situation can be easily observed by the big inspection port on both sides of the pump cover.
2, 2BE3 vacuum pump set the suction and discharge flanges both on the top and sides with the same diameter, so on-site installation is more flexible and convenient.
3. All bearings adopt the imported products in order to ensure precise orientation of impeller and high stability during the running.
4. The material of the impeller is welded with nodular iron or steel to ensure the high stability and increase the lifetime of the pump greatly during any hard conditions.
5. The pulley (when the pump is driven by the belt) adopts standard high precise taper bushing pulley to keep the reliable running and increase its lifetime, also it is easy to dismantle.
6. The pump body is made of steel or stainless steel plates to increase the lifetime of the pump
7. The shaft sleeve as the most easily damaged part, our shaft sleeve is made of stainless steel to increase the lifetime of the pump five times than normal material.
8. Special separator built-on the pump can save the space and reduce the noise efficiently.
9. All the castings by the resin sands with great quality, no puttying. Keep the heat dissipation is the best.
10. The mechanical seals (optional) adopt the imported parts to fully ensure the pump in the long-running process without leakage.
Compared with 2BE1 series 2BE3 series, difference is:
1: Volume increased obviously, vacuum degree, is suitable for gas drainage in coal mine, chemical industry and so on big volume work pressure swing adsorption (psa)
2: Bearing by cylindrical ball bearings instead of double row tapered sticks bearings, bearing capacity, increase service life
3: Pump cover each set inlet outlets, in addition to the top side is designed into the vent position, increase the installation options.
4: 2 be3 series increase eccentric partition in the pump body, impeller with medium plate with the pump body is divided into two cavity, colleagues to enable side flange into the vent, can satisfy a pump need two different pressure points, such as paper.
1: Exhaust and flare gas recovery
2: PVC device of VCM recovery
3: Recycle gas compression
4: Polyester production
5: Liquid nitrogen production
6: The vacuum crystallization, filtration
7: Pressure swing adsorption
8: Crude oil vacuum distillation tower in the vacuum system
9: Vacuum conveying of various materials, and so on
4. Package: Standard export plywood case or styrofoam with carton.
|Model||Capacity(m 3 /min)||Ultimate vacuum||Motor power(kw)||Speed|